Quantcast

Need Help-Master-Slave Issue

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
11 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Need Help-Master-Slave Issue

Anil Gaur
Hi All,

I am running jmeter test plan using Master and Slave.While running on Only master than it run successful but while running from master to slave then its not running.


Checked the Log file and found this:-

2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Configuring remote engine: 10.10.20.40
2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Starting remote engines
2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Starting the test @ Wed Feb 15 04:57:23 PST 2017 (1487163443547)
2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: running clientengine run method
2017/02/15 04:57:23 INFO  - jmeter.samplers.BatchSampleSender: Using batching (client settings) for this run. Thresholds: num=100, time=60000
2017/02/15 04:57:23 INFO  - jmeter.samplers.DataStrippingSampleSender: Using DataStrippingSampleSender for this run
2017/02/15 04:57:23 INFO  - jmeter.samplers.BatchSampleSender: Using batching (client settings) for this run. Thresholds: num=100, time=60000
2017/02/15 04:57:23 INFO  - jmeter.samplers.DataStrippingSampleSender: Using DataStrippingSampleSender for this run
2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: sent test to 10.10.20.40 basedir='.'
2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: Sending properties {}
2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: sent run command to 10.10.20.40
2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Remote engines have been started
2017/02/15 04:57:23 INFO  - jmeter.gui.util.JMeterMenuBar: setRunning(true,10.10.20.40)
2017/02/15 04:57:24 INFO  - jmeter.gui.util.JMeterMenuBar: setRunning(false,10.10.20.40)



Can any one please tell me what going on my slave beacuse I am not getting any error.
All Slave are on same subnet.
All slaves and master firewall are disabled.

Only Works on Master System. While executing on Slave its not working. I have already restarted all the slave but again same issue.


Regards
Anil

pmd
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Need Help-Master-Slave Issue

pmd
Did you check slave logs ?


On Wednesday, February 15, 2017, Anil Gaur <[hidden email]> wrote:

> Hi All,
>
> I am running jmeter test plan using Master and Slave.While running on Only
> master than it run successful but while running from master to slave then
> its not running.
>
>
> Checked the Log file and found this:-
>
> 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Configuring
> remote engine: 10.10.20.40
> 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Starting
> remote engines
> 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Starting the
> test @ Wed Feb 15 04:57:23 PST 2017 (1487163443547)
> 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: running
> clientengine run method
> 2017/02/15 04:57:23 INFO  - jmeter.samplers.BatchSampleSender: Using
> batching (client settings) for this run. Thresholds: num=100, time=60000
> 2017/02/15 04:57:23 INFO  - jmeter.samplers.DataStrippingSampleSender:
> Using DataStrippingSampleSender for this run
> 2017/02/15 04:57:23 INFO  - jmeter.samplers.BatchSampleSender: Using
> batching (client settings) for this run. Thresholds: num=100, time=60000
> 2017/02/15 04:57:23 INFO  - jmeter.samplers.DataStrippingSampleSender:
> Using DataStrippingSampleSender for this run
> 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: sent test
> to 10.10.20.40 basedir='.'
> 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: Sending
> properties {}
> 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: sent run
> command to 10.10.20.40
> 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Remote
> engines have been started
> 2017/02/15 04:57:23 INFO  - jmeter.gui.util.JMeterMenuBar:
> setRunning(true,10.10.20.40)
> 2017/02/15 04:57:24 INFO  - jmeter.gui.util.JMeterMenuBar:
> setRunning(false,10.10.20.40)
>
>
>
> Can any one please tell me what going on my slave beacuse I am not getting
> any error.
> All Slave are on same subnet.
> All slaves and master firewall are disabled.
>
> Only Works on Master System. While executing on Slave its not working. I
> have already restarted all the slave but again same issue.
>
>
> Regards
> Anil
>
>

--
Cordialement.
Philippe Mouawad.
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Need Help-Master-Slave Issue

max63_
If your jmeter test plan use data set file , are you sure that all these
files are accessible on the slave node ?

2017-02-15 14:44 GMT+01:00 Philippe Mouawad <[hidden email]>:

> Did you check slave logs ?
>
>
> On Wednesday, February 15, 2017, Anil Gaur <[hidden email]> wrote:
>
> > Hi All,
> >
> > I am running jmeter test plan using Master and Slave.While running on
> Only
> > master than it run successful but while running from master to slave then
> > its not running.
> >
> >
> > Checked the Log file and found this:-
> >
> > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Configuring
> > remote engine: 10.10.20.40
> > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Starting
> > remote engines
> > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Starting
> the
> > test @ Wed Feb 15 04:57:23 PST 2017 (1487163443547)
> > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: running
> > clientengine run method
> > 2017/02/15 04:57:23 INFO  - jmeter.samplers.BatchSampleSender: Using
> > batching (client settings) for this run. Thresholds: num=100, time=60000
> > 2017/02/15 04:57:23 INFO  - jmeter.samplers.DataStrippingSampleSender:
> > Using DataStrippingSampleSender for this run
> > 2017/02/15 04:57:23 INFO  - jmeter.samplers.BatchSampleSender: Using
> > batching (client settings) for this run. Thresholds: num=100, time=60000
> > 2017/02/15 04:57:23 INFO  - jmeter.samplers.DataStrippingSampleSender:
> > Using DataStrippingSampleSender for this run
> > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: sent test
> > to 10.10.20.40 basedir='.'
> > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: Sending
> > properties {}
> > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: sent run
> > command to 10.10.20.40
> > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Remote
> > engines have been started
> > 2017/02/15 04:57:23 INFO  - jmeter.gui.util.JMeterMenuBar:
> > setRunning(true,10.10.20.40)
> > 2017/02/15 04:57:24 INFO  - jmeter.gui.util.JMeterMenuBar:
> > setRunning(false,10.10.20.40)
> >
> >
> >
> > Can any one please tell me what going on my slave beacuse I am not
> getting
> > any error.
> > All Slave are on same subnet.
> > All slaves and master firewall are disabled.
> >
> > Only Works on Master System. While executing on Slave its not working. I
> > have already restarted all the slave but again same issue.
> >
> >
> > Regards
> > Anil
> >
> >
>
> --
> Cordialement.
> Philippe Mouawad.
>
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Need Help-Master-Slave Issue

Anil Gaur
Yes i have checked the slave log and found following errors:-

Test failed! java.lang.IllegalArgumentException: File test_dynamic.csv must exist and be readable

Can you please tell me . Do i ahve to put csv file on Slave as well? Yes then please give me steps.
________________________________
From: Maxime Chassagneux <[hidden email]>
Sent: Wednesday, February 15, 2017 2:22 PM
To: JMeter Users List
Subject: Re: Need Help-Master-Slave Issue

If your jmeter test plan use data set file , are you sure that all these
files are accessible on the slave node ?

2017-02-15 14:44 GMT+01:00 Philippe Mouawad <[hidden email]>:

> Did you check slave logs ?
>
>
> On Wednesday, February 15, 2017, Anil Gaur <[hidden email]> wrote:
>
> > Hi All,
> >
> > I am running jmeter test plan using Master and Slave.While running on
> Only
> > master than it run successful but while running from master to slave then
> > its not running.
> >
> >
> > Checked the Log file and found this:-
> >
> > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Configuring
> > remote engine: 10.10.20.40
> > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Starting
> > remote engines
> > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Starting
> the
> > test @ Wed Feb 15 04:57:23 PST 2017 (1487163443547)
> > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: running
> > clientengine run method
> > 2017/02/15 04:57:23 INFO  - jmeter.samplers.BatchSampleSender: Using
> > batching (client settings) for this run. Thresholds: num=100, time=60000
> > 2017/02/15 04:57:23 INFO  - jmeter.samplers.DataStrippingSampleSender:
> > Using DataStrippingSampleSender for this run
> > 2017/02/15 04:57:23 INFO  - jmeter.samplers.BatchSampleSender: Using
> > batching (client settings) for this run. Thresholds: num=100, time=60000
> > 2017/02/15 04:57:23 INFO  - jmeter.samplers.DataStrippingSampleSender:
> > Using DataStrippingSampleSender for this run
> > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: sent test
> > to 10.10.20.40 basedir='.'
> > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: Sending
> > properties {}
> > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: sent run
> > command to 10.10.20.40
> > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Remote
> > engines have been started
> > 2017/02/15 04:57:23 INFO  - jmeter.gui.util.JMeterMenuBar:
> > setRunning(true,10.10.20.40)
> > 2017/02/15 04:57:24 INFO  - jmeter.gui.util.JMeterMenuBar:
> > setRunning(false,10.10.20.40)
> >
> >
> >
> > Can any one please tell me what going on my slave beacuse I am not
> getting
> > any error.
> > All Slave are on same subnet.
> > All slaves and master firewall are disabled.
> >
> > Only Works on Master System. While executing on Slave its not working. I
> > have already restarted all the slave but again same issue.
> >
> >
> > Regards
> > Anil
> >
> >
>
> --
> Cordialement.
> Philippe Mouawad.
>
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Need Help-Master-Slave Issue

ra0077
In reply to this post by max63_
Same with third party plugin

The logs of the slave will help us to check these two points

Antonio

<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Garanti
sans virus. www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

2017-02-15 15:22 GMT+01:00 Maxime Chassagneux <[hidden email]>
:

> If your jmeter test plan use data set file , are you sure that all these
> files are accessible on the slave node ?
>
> 2017-02-15 14:44 GMT+01:00 Philippe Mouawad <[hidden email]>:
>
> > Did you check slave logs ?
> >
> >
> > On Wednesday, February 15, 2017, Anil Gaur <[hidden email]> wrote:
> >
> > > Hi All,
> > >
> > > I am running jmeter test plan using Master and Slave.While running on
> > Only
> > > master than it run successful but while running from master to slave
> then
> > > its not running.
> > >
> > >
> > > Checked the Log file and found this:-
> > >
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner:
> Configuring
> > > remote engine: 10.10.20.40
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Starting
> > > remote engines
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Starting
> > the
> > > test @ Wed Feb 15 04:57:23 PST 2017 (1487163443547)
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: running
> > > clientengine run method
> > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.BatchSampleSender: Using
> > > batching (client settings) for this run. Thresholds: num=100,
> time=60000
> > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.DataStrippingSampleSender:
> > > Using DataStrippingSampleSender for this run
> > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.BatchSampleSender: Using
> > > batching (client settings) for this run. Thresholds: num=100,
> time=60000
> > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.DataStrippingSampleSender:
> > > Using DataStrippingSampleSender for this run
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: sent
> test
> > > to 10.10.20.40 basedir='.'
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: Sending
> > > properties {}
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: sent run
> > > command to 10.10.20.40
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Remote
> > > engines have been started
> > > 2017/02/15 04:57:23 INFO  - jmeter.gui.util.JMeterMenuBar:
> > > setRunning(true,10.10.20.40)
> > > 2017/02/15 04:57:24 INFO  - jmeter.gui.util.JMeterMenuBar:
> > > setRunning(false,10.10.20.40)
> > >
> > >
> > >
> > > Can any one please tell me what going on my slave beacuse I am not
> > getting
> > > any error.
> > > All Slave are on same subnet.
> > > All slaves and master firewall are disabled.
> > >
> > > Only Works on Master System. While executing on Slave its not working.
> I
> > > have already restarted all the slave but again same issue.
> > >
> > >
> > > Regards
> > > Anil
> > >
> > >
> >
> > --
> > Cordialement.
> > Philippe Mouawad.
> >
>
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Need Help-Master-Slave Issue

ra0077
In reply to this post by Anil Gaur
You need to upload test_dynamic.csv file in all the slaves

Antonio

<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Garanti
sans virus. www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

2017-02-15 15:34 GMT+01:00 Anil Gaur <[hidden email]>:

> Yes i have checked the slave log and found following errors:-
>
> Test failed! java.lang.IllegalArgumentException: File test_dynamic.csv
> must exist and be readable
>
> Can you please tell me . Do i ahve to put csv file on Slave as well? Yes
> then please give me steps.
> ________________________________
> From: Maxime Chassagneux <[hidden email]>
> Sent: Wednesday, February 15, 2017 2:22 PM
> To: JMeter Users List
> Subject: Re: Need Help-Master-Slave Issue
>
> If your jmeter test plan use data set file , are you sure that all these
> files are accessible on the slave node ?
>
> 2017-02-15 14:44 GMT+01:00 Philippe Mouawad <[hidden email]>:
>
> > Did you check slave logs ?
> >
> >
> > On Wednesday, February 15, 2017, Anil Gaur <[hidden email]> wrote:
> >
> > > Hi All,
> > >
> > > I am running jmeter test plan using Master and Slave.While running on
> > Only
> > > master than it run successful but while running from master to slave
> then
> > > its not running.
> > >
> > >
> > > Checked the Log file and found this:-
> > >
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner:
> Configuring
> > > remote engine: 10.10.20.40
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Starting
> > > remote engines
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Starting
> > the
> > > test @ Wed Feb 15 04:57:23 PST 2017 (1487163443547)
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: running
> > > clientengine run method
> > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.BatchSampleSender: Using
> > > batching (client settings) for this run. Thresholds: num=100,
> time=60000
> > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.DataStrippingSampleSender:
> > > Using DataStrippingSampleSender for this run
> > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.BatchSampleSender: Using
> > > batching (client settings) for this run. Thresholds: num=100,
> time=60000
> > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.DataStrippingSampleSender:
> > > Using DataStrippingSampleSender for this run
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: sent
> test
> > > to 10.10.20.40 basedir='.'
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: Sending
> > > properties {}
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: sent run
> > > command to 10.10.20.40
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Remote
> > > engines have been started
> > > 2017/02/15 04:57:23 INFO  - jmeter.gui.util.JMeterMenuBar:
> > > setRunning(true,10.10.20.40)
> > > 2017/02/15 04:57:24 INFO  - jmeter.gui.util.JMeterMenuBar:
> > > setRunning(false,10.10.20.40)
> > >
> > >
> > >
> > > Can any one please tell me what going on my slave beacuse I am not
> > getting
> > > any error.
> > > All Slave are on same subnet.
> > > All slaves and master firewall are disabled.
> > >
> > > Only Works on Master System. While executing on Slave its not working.
> I
> > > have already restarted all the slave but again same issue.
> > >
> > >
> > > Regards
> > > Anil
> > >
> > >
> >
> > --
> > Cordialement.
> > Philippe Mouawad.
> >
>
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Need Help-Master-Slave Issue

Anil Gaur
Where I have to upload the CSV file in Slave?  I m guessing BIN folder where my Master CSV exist?


Anil

________________________________
From: Antonio Gomes Rodrigues <[hidden email]>
Sent: Wednesday, February 15, 2017 2:36 PM
To: JMeter Users List
Subject: Re: Need Help-Master-Slave Issue

You need to upload test_dynamic.csv file in all the slaves

Antonio

<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Garanti
sans virus. www.avast.com<http://www.avast.com>
Avast | Download Free Antivirus for PC, Mac & Android<http://www.avast.com/>
www.avast.com
Protect your devices with the best free antivirus on the market. Download Avast antivirus and anti-spyware protection for your PC, Mac and Android.



<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

2017-02-15 15:34 GMT+01:00 Anil Gaur <[hidden email]>:

> Yes i have checked the slave log and found following errors:-
>
> Test failed! java.lang.IllegalArgumentException: File test_dynamic.csv
> must exist and be readable
>
> Can you please tell me . Do i ahve to put csv file on Slave as well? Yes
> then please give me steps.
> ________________________________
> From: Maxime Chassagneux <[hidden email]>
> Sent: Wednesday, February 15, 2017 2:22 PM
> To: JMeter Users List
> Subject: Re: Need Help-Master-Slave Issue
>
> If your jmeter test plan use data set file , are you sure that all these
> files are accessible on the slave node ?
>
> 2017-02-15 14:44 GMT+01:00 Philippe Mouawad <[hidden email]>:
>
> > Did you check slave logs ?
> >
> >
> > On Wednesday, February 15, 2017, Anil Gaur <[hidden email]> wrote:
> >
> > > Hi All,
> > >
> > > I am running jmeter test plan using Master and Slave.While running on
> > Only
> > > master than it run successful but while running from master to slave
> then
> > > its not running.
> > >
> > >
> > > Checked the Log file and found this:-
> > >
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner:
> Configuring
> > > remote engine: 10.10.20.40
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Starting
> > > remote engines
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Starting
> > the
> > > test @ Wed Feb 15 04:57:23 PST 2017 (1487163443547)
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: running
> > > clientengine run method
> > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.BatchSampleSender: Using
> > > batching (client settings) for this run. Thresholds: num=100,
> time=60000
> > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.DataStrippingSampleSender:
> > > Using DataStrippingSampleSender for this run
> > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.BatchSampleSender: Using
> > > batching (client settings) for this run. Thresholds: num=100,
> time=60000
> > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.DataStrippingSampleSender:
> > > Using DataStrippingSampleSender for this run
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: sent
> test
> > > to 10.10.20.40 basedir='.'
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: Sending
> > > properties {}
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: sent run
> > > command to 10.10.20.40
> > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Remote
> > > engines have been started
> > > 2017/02/15 04:57:23 INFO  - jmeter.gui.util.JMeterMenuBar:
> > > setRunning(true,10.10.20.40)
> > > 2017/02/15 04:57:24 INFO  - jmeter.gui.util.JMeterMenuBar:
> > > setRunning(false,10.10.20.40)
> > >
> > >
> > >
> > > Can any one please tell me what going on my slave beacuse I am not
> > getting
> > > any error.
> > > All Slave are on same subnet.
> > > All slaves and master firewall are disabled.
> > >
> > > Only Works on Master System. While executing on Slave its not working.
> I
> > > have already restarted all the slave but again same issue.
> > >
> > >
> > > Regards
> > > Anil
> > >
> > >
> >
> > --
> > Cordialement.
> > Philippe Mouawad.
> >
>
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Need Help-Master-Slave Issue

ra0077
The file must be in the same directory as in Master

If it's in bin folder in master, put it in bin folfer in slaves

Antonio

<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Garanti
sans virus. www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

2017-02-15 15:38 GMT+01:00 Anil Gaur <[hidden email]>:

> Where I have to upload the CSV file in Slave?  I m guessing BIN folder
> where my Master CSV exist?
>
>
> Anil
>
> ________________________________
> From: Antonio Gomes Rodrigues <[hidden email]>
> Sent: Wednesday, February 15, 2017 2:36 PM
> To: JMeter Users List
> Subject: Re: Need Help-Master-Slave Issue
>
> You need to upload test_dynamic.csv file in all the slaves
>
> Antonio
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail>
> Garanti
> sans virus. www.avast.com<http://www.avast.com>
> Avast | Download Free Antivirus for PC, Mac & Android<
> http://www.avast.com/>
> www.avast.com
> Protect your devices with the best free antivirus on the market. Download
> Avast antivirus and anti-spyware protection for your PC, Mac and Android.
>
>
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail>
> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> 2017-02-15 15:34 GMT+01:00 Anil Gaur <[hidden email]>:
>
> > Yes i have checked the slave log and found following errors:-
> >
> > Test failed! java.lang.IllegalArgumentException: File test_dynamic.csv
> > must exist and be readable
> >
> > Can you please tell me . Do i ahve to put csv file on Slave as well? Yes
> > then please give me steps.
> > ________________________________
> > From: Maxime Chassagneux <[hidden email]>
> > Sent: Wednesday, February 15, 2017 2:22 PM
> > To: JMeter Users List
> > Subject: Re: Need Help-Master-Slave Issue
> >
> > If your jmeter test plan use data set file , are you sure that all these
> > files are accessible on the slave node ?
> >
> > 2017-02-15 14:44 GMT+01:00 Philippe Mouawad <[hidden email]
> >:
> >
> > > Did you check slave logs ?
> > >
> > >
> > > On Wednesday, February 15, 2017, Anil Gaur <[hidden email]> wrote:
> > >
> > > > Hi All,
> > > >
> > > > I am running jmeter test plan using Master and Slave.While running on
> > > Only
> > > > master than it run successful but while running from master to slave
> > then
> > > > its not running.
> > > >
> > > >
> > > > Checked the Log file and found this:-
> > > >
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner:
> > Configuring
> > > > remote engine: 10.10.20.40
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner:
> Starting
> > > > remote engines
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner:
> Starting
> > > the
> > > > test @ Wed Feb 15 04:57:23 PST 2017 (1487163443547)
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine:
> running
> > > > clientengine run method
> > > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.BatchSampleSender: Using
> > > > batching (client settings) for this run. Thresholds: num=100,
> > time=60000
> > > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.
> DataStrippingSampleSender:
> > > > Using DataStrippingSampleSender for this run
> > > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.BatchSampleSender: Using
> > > > batching (client settings) for this run. Thresholds: num=100,
> > time=60000
> > > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.
> DataStrippingSampleSender:
> > > > Using DataStrippingSampleSender for this run
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: sent
> > test
> > > > to 10.10.20.40 basedir='.'
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine:
> Sending
> > > > properties {}
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: sent
> run
> > > > command to 10.10.20.40
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Remote
> > > > engines have been started
> > > > 2017/02/15 04:57:23 INFO  - jmeter.gui.util.JMeterMenuBar:
> > > > setRunning(true,10.10.20.40)
> > > > 2017/02/15 04:57:24 INFO  - jmeter.gui.util.JMeterMenuBar:
> > > > setRunning(false,10.10.20.40)
> > > >
> > > >
> > > >
> > > > Can any one please tell me what going on my slave beacuse I am not
> > > getting
> > > > any error.
> > > > All Slave are on same subnet.
> > > > All slaves and master firewall are disabled.
> > > >
> > > > Only Works on Master System. While executing on Slave its not
> working.
> > I
> > > > have already restarted all the slave but again same issue.
> > > >
> > > >
> > > > Regards
> > > > Anil
> > > >
> > > >
> > >
> > > --
> > > Cordialement.
> > > Philippe Mouawad.
> > >
> >
>
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Need Help-Master-Slave Issue

Anil Gaur
Hi I have place CSV file on the same location for slave where the CSV file put up in master system. But i am getting same error.

While ruining the same test plan on Mater its running perfectly but only on slave its giving the error. Which i can find only slave server log file. on master system log i am not getting any error.


Anil


________________________________
From: Antonio Gomes Rodrigues <[hidden email]>
Sent: Wednesday, February 15, 2017 2:41 PM
To: JMeter Users List
Subject: Re: Need Help-Master-Slave Issue

The file must be in the same directory as in Master

If it's in bin folder in master, put it in bin folfer in slaves

Antonio

<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Garanti
sans virus. www.avast.com<http://www.avast.com>
Avast | Download Free Antivirus for PC, Mac & Android<http://www.avast.com/>
www.avast.com
Protect your devices with the best free antivirus on the market. Download Avast antivirus and anti-spyware protection for your PC, Mac and Android.



<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

2017-02-15 15:38 GMT+01:00 Anil Gaur <[hidden email]>:

> Where I have to upload the CSV file in Slave?  I m guessing BIN folder
> where my Master CSV exist?
>
>
> Anil
>
> ________________________________
> From: Antonio Gomes Rodrigues <[hidden email]>
> Sent: Wednesday, February 15, 2017 2:36 PM
> To: JMeter Users List
> Subject: Re: Need Help-Master-Slave Issue
>
> You need to upload test_dynamic.csv file in all the slaves
>
> Antonio
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail>
> Garanti
> sans virus. www.avast.com<http://www.avast.com>
> Avast | Download Free Antivirus for PC, Mac & Android<
> http://www.avast.com/>
> www.avast.com<http://www.avast.com>
> Protect your devices with the best free antivirus on the market. Download
> Avast antivirus and anti-spyware protection for your PC, Mac and Android.
>
>
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail>
> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> 2017-02-15 15:34 GMT+01:00 Anil Gaur <[hidden email]>:
>
> > Yes i have checked the slave log and found following errors:-
> >
> > Test failed! java.lang.IllegalArgumentException: File test_dynamic.csv
> > must exist and be readable
> >
> > Can you please tell me . Do i ahve to put csv file on Slave as well? Yes
> > then please give me steps.
> > ________________________________
> > From: Maxime Chassagneux <[hidden email]>
> > Sent: Wednesday, February 15, 2017 2:22 PM
> > To: JMeter Users List
> > Subject: Re: Need Help-Master-Slave Issue
> >
> > If your jmeter test plan use data set file , are you sure that all these
> > files are accessible on the slave node ?
> >
> > 2017-02-15 14:44 GMT+01:00 Philippe Mouawad <[hidden email]
> >:
> >
> > > Did you check slave logs ?
> > >
> > >
> > > On Wednesday, February 15, 2017, Anil Gaur <[hidden email]> wrote:
> > >
> > > > Hi All,
> > > >
> > > > I am running jmeter test plan using Master and Slave.While running on
> > > Only
> > > > master than it run successful but while running from master to slave
> > then
> > > > its not running.
> > > >
> > > >
> > > > Checked the Log file and found this:-
> > > >
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner:
> > Configuring
> > > > remote engine: 10.10.20.40
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner:
> Starting
> > > > remote engines
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner:
> Starting
> > > the
> > > > test @ Wed Feb 15 04:57:23 PST 2017 (1487163443547)
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine:
> running
> > > > clientengine run method
> > > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.BatchSampleSender: Using
> > > > batching (client settings) for this run. Thresholds: num=100,
> > time=60000
> > > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.
> DataStrippingSampleSender:
> > > > Using DataStrippingSampleSender for this run
> > > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.BatchSampleSender: Using
> > > > batching (client settings) for this run. Thresholds: num=100,
> > time=60000
> > > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.
> DataStrippingSampleSender:
> > > > Using DataStrippingSampleSender for this run
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: sent
> > test
> > > > to 10.10.20.40 basedir='.'
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine:
> Sending
> > > > properties {}
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: sent
> run
> > > > command to 10.10.20.40
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Remote
> > > > engines have been started
> > > > 2017/02/15 04:57:23 INFO  - jmeter.gui.util.JMeterMenuBar:
> > > > setRunning(true,10.10.20.40)
> > > > 2017/02/15 04:57:24 INFO  - jmeter.gui.util.JMeterMenuBar:
> > > > setRunning(false,10.10.20.40)
> > > >
> > > >
> > > >
> > > > Can any one please tell me what going on my slave beacuse I am not
> > > getting
> > > > any error.
> > > > All Slave are on same subnet.
> > > > All slaves and master firewall are disabled.
> > > >
> > > > Only Works on Master System. While executing on Slave its not
> working.
> > I
> > > > have already restarted all the slave but again same issue.
> > > >
> > > >
> > > > Regards
> > > > Anil
> > > >
> > > >
> > >
> > > --
> > > Cordialement.
> > > Philippe Mouawad.
> > >
> >
>
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Need Help-Master-Slave Issue

ra0077
Hi,

Can you log in slave with the same user which run JMeter and try to open
the file

Antonio

2017-02-15 15:51 GMT+01:00 Anil Gaur <[hidden email]>:

> Hi I have place CSV file on the same location for slave where the CSV file
> put up in master system. But i am getting same error.
>
> While ruining the same test plan on Mater its running perfectly but only
> on slave its giving the error. Which i can find only slave server log file.
> on master system log i am not getting any error.
>
>
> Anil
>
>
> ________________________________
> From: Antonio Gomes Rodrigues <[hidden email]>
> Sent: Wednesday, February 15, 2017 2:41 PM
> To: JMeter Users List
> Subject: Re: Need Help-Master-Slave Issue
>
> The file must be in the same directory as in Master
>
> If it's in bin folder in master, put it in bin folfer in slaves
>
> Antonio
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail>
> Garanti
> sans virus. www.avast.com<http://www.avast.com>
> Avast | Download Free Antivirus for PC, Mac & Android<
> http://www.avast.com/>
> www.avast.com
> Protect your devices with the best free antivirus on the market. Download
> Avast antivirus and anti-spyware protection for your PC, Mac and Android.
>
>
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail>
> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> 2017-02-15 15:38 GMT+01:00 Anil Gaur <[hidden email]>:
>
> > Where I have to upload the CSV file in Slave?  I m guessing BIN folder
> > where my Master CSV exist?
> >
> >
> > Anil
> >
> > ________________________________
> > From: Antonio Gomes Rodrigues <[hidden email]>
> > Sent: Wednesday, February 15, 2017 2:36 PM
> > To: JMeter Users List
> > Subject: Re: Need Help-Master-Slave Issue
> >
> > You need to upload test_dynamic.csv file in all the slaves
> >
> > Antonio
> >
> > <https://www.avast.com/sig-email?utm_medium=email&utm_
> > source=link&utm_campaign=sig-email&utm_content=webmail>
> > Garanti
> > sans virus. www.avast.com<http://www.avast.com>
> > Avast | Download Free Antivirus for PC, Mac & Android<
> > http://www.avast.com/>
> > www.avast.com<http://www.avast.com>
> > Protect your devices with the best free antivirus on the market. Download
> > Avast antivirus and anti-spyware protection for your PC, Mac and Android.
> >
> >
> >
> > <https://www.avast.com/sig-email?utm_medium=email&utm_
> > source=link&utm_campaign=sig-email&utm_content=webmail>
> > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
> >
> > 2017-02-15 15:34 GMT+01:00 Anil Gaur <[hidden email]>:
> >
> > > Yes i have checked the slave log and found following errors:-
> > >
> > > Test failed! java.lang.IllegalArgumentException: File test_dynamic.csv
> > > must exist and be readable
> > >
> > > Can you please tell me . Do i ahve to put csv file on Slave as well?
> Yes
> > > then please give me steps.
> > > ________________________________
> > > From: Maxime Chassagneux <[hidden email]>
> > > Sent: Wednesday, February 15, 2017 2:22 PM
> > > To: JMeter Users List
> > > Subject: Re: Need Help-Master-Slave Issue
> > >
> > > If your jmeter test plan use data set file , are you sure that all
> these
> > > files are accessible on the slave node ?
> > >
> > > 2017-02-15 14:44 GMT+01:00 Philippe Mouawad <
> [hidden email]
> > >:
> > >
> > > > Did you check slave logs ?
> > > >
> > > >
> > > > On Wednesday, February 15, 2017, Anil Gaur <[hidden email]>
> wrote:
> > > >
> > > > > Hi All,
> > > > >
> > > > > I am running jmeter test plan using Master and Slave.While running
> on
> > > > Only
> > > > > master than it run successful but while running from master to
> slave
> > > then
> > > > > its not running.
> > > > >
> > > > >
> > > > > Checked the Log file and found this:-
> > > > >
> > > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner:
> > > Configuring
> > > > > remote engine: 10.10.20.40
> > > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner:
> > Starting
> > > > > remote engines
> > > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner:
> > Starting
> > > > the
> > > > > test @ Wed Feb 15 04:57:23 PST 2017 (1487163443547)
> > > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine:
> > running
> > > > > clientengine run method
> > > > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.BatchSampleSender:
> Using
> > > > > batching (client settings) for this run. Thresholds: num=100,
> > > time=60000
> > > > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.
> > DataStrippingSampleSender:
> > > > > Using DataStrippingSampleSender for this run
> > > > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.BatchSampleSender:
> Using
> > > > > batching (client settings) for this run. Thresholds: num=100,
> > > time=60000
> > > > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.
> > DataStrippingSampleSender:
> > > > > Using DataStrippingSampleSender for this run
> > > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: sent
> > > test
> > > > > to 10.10.20.40 basedir='.'
> > > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine:
> > Sending
> > > > > properties {}
> > > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: sent
> > run
> > > > > command to 10.10.20.40
> > > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner:
> Remote
> > > > > engines have been started
> > > > > 2017/02/15 04:57:23 INFO  - jmeter.gui.util.JMeterMenuBar:
> > > > > setRunning(true,10.10.20.40)
> > > > > 2017/02/15 04:57:24 INFO  - jmeter.gui.util.JMeterMenuBar:
> > > > > setRunning(false,10.10.20.40)
> > > > >
> > > > >
> > > > >
> > > > > Can any one please tell me what going on my slave beacuse I am not
> > > > getting
> > > > > any error.
> > > > > All Slave are on same subnet.
> > > > > All slaves and master firewall are disabled.
> > > > >
> > > > > Only Works on Master System. While executing on Slave its not
> > working.
> > > I
> > > > > have already restarted all the slave but again same issue.
> > > > >
> > > > >
> > > > > Regards
> > > > > Anil
> > > > >
> > > > >
> > > >
> > > > --
> > > > Cordialement.
> > > > Philippe Mouawad.
> > > >
> > >
> >
>
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Need Help-Master-Slave Issue

Anil Gaur
In reply to this post by Anil Gaur
Hi found that on Master system i am getting following error.So might me this is the issue for slave.


So can some one suggest me how to over come from this issue?


jmeter.protocol.http.control.KerberosManager: Could not log in user Loadtest4 javax.security.auth.login.LoginException: No LoginModules configured for JMeter
at javax.security.auth.login.LoginContext.init(Unknown Source)
at javax.security.auth.login.LoginContext.<init>(Unknown Source)
at org.apache.jmeter.protocol.http.control.KerberosManager$1.call(KerberosManager.java:71)
at org.apache.jmeter.protocol.http.control.KerberosManager$1.call(KerberosManager.java:65)
at java.util.concurrent.FutureTask.run(Unknown Source)
at org.apache.jmeter.protocol.http.control.KerberosManager.getSubjectForUser(KerberosManager.java:89)
at org.apache.jmeter.protocol.http.control.AuthManager.getSubjectForUrl(AuthManager.java:276)
at org.apache.jmeter.protocol.http.sampler.HTTPHC4Impl.executeRequest(HTTPHC4Impl.java:634)
at org.apache.jmeter.protocol.http.sampler.HTTPHC4Impl.sample(HTTPHC4Impl.java:413)
at org.apache.jmeter.protocol.http.sampler.HTTPSamplerProxy.sample(HTTPSamplerProxy.java:74)
at org.apache.jmeter.protocol.http.sampler.HTTPSamplerBase.sample(HTTPSamplerBase.java:1166)
at org.apache.jmeter.protocol.http.sampler.HTTPSamplerBase.sample(HTTPSamplerBase.java:1155)
at org.apache.jmeter.threads.JMeterThread.executeSamplePackage(JMeterThread.java:475)
at org.apache.jmeter.threads.JMeterThread.processSampler(JMeterThread.java:418)
at org.apache.jmeter.threads.JMeterThread.run(JMeterThread.java:249)
at java.lang.Thread.run(Unknown Source)




________________________________
From: Anil Gaur <[hidden email]>
Sent: Wednesday, February 15, 2017 2:51 PM
To: JMeter Users List
Subject: Re: Need Help-Master-Slave Issue

Hi I have place CSV file on the same location for slave where the CSV file put up in master system. But i am getting same error.

While ruining the same test plan on Mater its running perfectly but only on slave its giving the error. Which i can find only slave server log file. on master system log i am not getting any error.


Anil


________________________________
From: Antonio Gomes Rodrigues <[hidden email]>
Sent: Wednesday, February 15, 2017 2:41 PM
To: JMeter Users List
Subject: Re: Need Help-Master-Slave Issue

The file must be in the same directory as in Master

If it's in bin folder in master, put it in bin folfer in slaves

Antonio

<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Garanti
sans virus. www.avast.com<http://www.avast.com>
Avast | Download Free Antivirus for PC, Mac & Android<http://www.avast.com/>
www.avast.com
Protect your devices with the best free antivirus on the market. Download Avast antivirus and anti-spyware protection for your PC, Mac and Android.



Avast | Download Free Antivirus for PC, Mac & Android<http://www.avast.com/>
Avast | Download Free Antivirus for PC, Mac & Android<http://www.avast.com/>
www.avast.com
Protect your devices with the best free antivirus on the market. Download Avast antivirus and anti-spyware protection for your PC, Mac and Android.



www.avast.com<http://www.avast.com>
Avast | Download Free Antivirus for PC, Mac & Android<http://www.avast.com/>
www.avast.com
Protect your devices with the best free antivirus on the market. Download Avast antivirus and anti-spyware protection for your PC, Mac and Android.



Protect your devices with the best free antivirus on the market. Download Avast antivirus and anti-spyware protection for your PC, Mac and Android.



<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

2017-02-15 15:38 GMT+01:00 Anil Gaur <[hidden email]>:

> Where I have to upload the CSV file in Slave?  I m guessing BIN folder
> where my Master CSV exist?
>
>
> Anil
>
> ________________________________
> From: Antonio Gomes Rodrigues <[hidden email]>
> Sent: Wednesday, February 15, 2017 2:36 PM
> To: JMeter Users List
> Subject: Re: Need Help-Master-Slave Issue
>
> You need to upload test_dynamic.csv file in all the slaves
>
> Antonio
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail>
> Garanti
> sans virus. www.avast.com<http://www.avast.com>
> Avast | Download Free Antivirus for PC, Mac & Android<
> http://www.avast.com/>
> www.avast.com<http://www.avast.com>
> Protect your devices with the best free antivirus on the market. Download
> Avast antivirus and anti-spyware protection for your PC, Mac and Android.
>
>
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail>
> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> 2017-02-15 15:34 GMT+01:00 Anil Gaur <[hidden email]>:
>
> > Yes i have checked the slave log and found following errors:-
> >
> > Test failed! java.lang.IllegalArgumentException: File test_dynamic.csv
> > must exist and be readable
> >
> > Can you please tell me . Do i ahve to put csv file on Slave as well? Yes
> > then please give me steps.
> > ________________________________
> > From: Maxime Chassagneux <[hidden email]>
> > Sent: Wednesday, February 15, 2017 2:22 PM
> > To: JMeter Users List
> > Subject: Re: Need Help-Master-Slave Issue
> >
> > If your jmeter test plan use data set file , are you sure that all these
> > files are accessible on the slave node ?
> >
> > 2017-02-15 14:44 GMT+01:00 Philippe Mouawad <[hidden email]
> >:
> >
> > > Did you check slave logs ?
> > >
> > >
> > > On Wednesday, February 15, 2017, Anil Gaur <[hidden email]> wrote:
> > >
> > > > Hi All,
> > > >
> > > > I am running jmeter test plan using Master and Slave.While running on
> > > Only
> > > > master than it run successful but while running from master to slave
> > then
> > > > its not running.
> > > >
> > > >
> > > > Checked the Log file and found this:-
> > > >
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner:
> > Configuring
> > > > remote engine: 10.10.20.40
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner:
> Starting
> > > > remote engines
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner:
> Starting
> > > the
> > > > test @ Wed Feb 15 04:57:23 PST 2017 (1487163443547)
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine:
> running
> > > > clientengine run method
> > > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.BatchSampleSender: Using
> > > > batching (client settings) for this run. Thresholds: num=100,
> > time=60000
> > > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.
> DataStrippingSampleSender:
> > > > Using DataStrippingSampleSender for this run
> > > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.BatchSampleSender: Using
> > > > batching (client settings) for this run. Thresholds: num=100,
> > time=60000
> > > > 2017/02/15 04:57:23 INFO  - jmeter.samplers.
> DataStrippingSampleSender:
> > > > Using DataStrippingSampleSender for this run
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: sent
> > test
> > > > to 10.10.20.40 basedir='.'
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine:
> Sending
> > > > properties {}
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.ClientJMeterEngine: sent
> run
> > > > command to 10.10.20.40
> > > > 2017/02/15 04:57:23 INFO  - jmeter.engine.DistributedRunner: Remote
> > > > engines have been started
> > > > 2017/02/15 04:57:23 INFO  - jmeter.gui.util.JMeterMenuBar:
> > > > setRunning(true,10.10.20.40)
> > > > 2017/02/15 04:57:24 INFO  - jmeter.gui.util.JMeterMenuBar:
> > > > setRunning(false,10.10.20.40)
> > > >
> > > >
> > > >
> > > > Can any one please tell me what going on my slave beacuse I am not
> > > getting
> > > > any error.
> > > > All Slave are on same subnet.
> > > > All slaves and master firewall are disabled.
> > > >
> > > > Only Works on Master System. While executing on Slave its not
> working.
> > I
> > > > have already restarted all the slave but again same issue.
> > > >
> > > >
> > > > Regards
> > > > Anil
> > > >
> > > >
> > >
> > > --
> > > Cordialement.
> > > Philippe Mouawad.
> > >
> >
>
Loading...