Hi,
First of all, I wish the thank all the people that contributed to the release of 5.4.1. This is the best-ever release of Jmeter ! Well done ! I’m currently installing it on the performance labs everywhere. One issue still remains regarding the JSON path Tester – While switching from TEXT to JSON path Tester, both the Sampler result tab as well as the Request tab disappear. It would be much more usable having the JSON path Tester displayed inside the Response data tab, instead of hiding an above-mentioned couple of tabs. Thank you very much, Shay -- Sincerely, *Shay Ginsbourg* *Performance, Automation, and Load Testing Expert. * *Regulatory Affairs Consultant for Medical Software.* *(Since 2008)* *Ginsbourg.co.il* <http://Ginsbourg.co.il> Formerly QA Manager of LoadRunner at Mercury Interactive M.Sc. cum laude in Bio-Medical Engineering M.Sc. in Mechanical Engineering Mobile: +972(0)54-6690915 Email: [hidden email] Visit my personal page on LinkedIn at http://www.linkedin.com/in/shayginsbourg |
Am 31.01.21 um 11:56 schrieb Shay Ginsbourg:
> Hi, > > > > First of all, I wish the thank all the people that contributed to the > release of 5.4.1. +1 > > > > This is the best-ever release of Jmeter ! Well done ! > > > > I’m currently installing it on the performance labs everywhere. > > > > One issue still remains regarding the JSON path Tester – > > > > While switching from TEXT to JSON path Tester, both the Sampler result tab > as well as the Request tab disappear. > > > > It would be much more usable having the JSON path Tester displayed inside > the Response data tab, instead of hiding an above-mentioned couple of tabs. I think it would be best to open an ehancement issue on bugzilla. Mails with such ideas tend to get lost :) And if anyone would like to submit a patch to implement this, even better. Felix > > > > Thank you very much, > > > > Shay > > > > --------------------------------------------------------------------- To unsubscribe, e-mail: [hidden email] For additional commands, e-mail: [hidden email] |
What's the link to the correct Bugzilla ?
thanks, Shay I think it would be best to open an ehancement issue on bugzilla. Mails with such ideas tend to get lost :) And if anyone would like to submit a patch to implement this, even better. Felix On Sat, Feb 6, 2021 at 12:32 PM Felix Schumacher < [hidden email]> wrote: > Am 31.01.21 um 11:56 schrieb Shay Ginsbourg: > > Hi, > > > > > > > > First of all, I wish the thank all the people that contributed to the > > release of 5.4.1. > > +1 > > > > > > > > > > This is the best-ever release of Jmeter ! Well done ! > > > > > > > > I’m currently installing it on the performance labs everywhere. > > > > > > > > One issue still remains regarding the JSON path Tester – > > > > > > > > While switching from TEXT to JSON path Tester, both the Sampler result > tab > > as well as the Request tab disappear. > > > > > > > > It would be much more usable having the JSON path Tester displayed inside > > the Response data tab, instead of hiding an above-mentioned couple of > tabs. > > I think it would be best to open an ehancement issue on bugzilla. Mails > with such ideas tend to get lost :) > > And if anyone would like to submit a patch to implement this, even better. > > Felix > > > > > > > > > Thank you very much, > > > > > > > > Shay > > > > > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [hidden email] > For additional commands, e-mail: [hidden email] > > -- Sincerely, *Shay Ginsbourg* *Performance, Automation, and Load Testing Expert. * *Regulatory Affairs Consultant for Medical Software.* *(Since 2008)* *Ginsbourg.co.il* <http://Ginsbourg.co.il> Formerly QA Manager of LoadRunner at Mercury Interactive M.Sc. cum laude in Bio-Medical Engineering M.Sc. in Mechanical Engineering Mobile: +972(0)54-6690915 Email: [hidden email] Visit my personal page on LinkedIn at: http://www.linkedin.com/in/shayginsbourg |
Hi Shay,
To create JMeter bug use https://bz.apache.org/bugzilla/enter_bug.cgi?product=JMeter FYI On Sun, Feb 7, 2021 at 2:18 PM Shay Ginsbourg <[hidden email]> wrote: > What's the link to the correct Bugzilla ? > > thanks, > Shay > > > > > > I think it would be best to open an ehancement issue on bugzilla. Mails > with such ideas tend to get lost :) > > And if anyone would like to submit a patch to implement this, even better. > > Felix > > On Sat, Feb 6, 2021 at 12:32 PM Felix Schumacher < > [hidden email]> wrote: > > > Am 31.01.21 um 11:56 schrieb Shay Ginsbourg: > > > Hi, > > > > > > > > > > > > First of all, I wish the thank all the people that contributed to the > > > release of 5.4.1. > > > > +1 > > > > > > > > > > > > > > > > This is the best-ever release of Jmeter ! Well done ! > > > > > > > > > > > > I’m currently installing it on the performance labs everywhere. > > > > > > > > > > > > One issue still remains regarding the JSON path Tester – > > > > > > > > > > > > While switching from TEXT to JSON path Tester, both the Sampler result > > tab > > > as well as the Request tab disappear. > > > > > > > > > > > > It would be much more usable having the JSON path Tester displayed > inside > > > the Response data tab, instead of hiding an above-mentioned couple of > > tabs. > > > > I think it would be best to open an ehancement issue on bugzilla. Mails > > with such ideas tend to get lost :) > > > > And if anyone would like to submit a patch to implement this, even > better. > > > > Felix > > > > > > > > > > > > > > Thank you very much, > > > > > > > > > > > > Shay > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [hidden email] > > For additional commands, e-mail: [hidden email] > > > > > > -- > > > Sincerely, > > > > *Shay Ginsbourg* > > *Performance, Automation, and Load Testing Expert. * > > *Regulatory Affairs Consultant for Medical Software.* > > *(Since 2008)* > > > > *Ginsbourg.co.il* > <http://Ginsbourg.co.il> > > > Formerly QA Manager of LoadRunner at Mercury Interactive > > > > M.Sc. cum laude in Bio-Medical Engineering > > M.Sc. in Mechanical Engineering > > > Mobile: +972(0)54-6690915 > Email: [hidden email] > > Visit my personal page on LinkedIn at: > http://www.linkedin.com/in/shayginsbourg > |
In reply to this post by Felix Schumacher
Hi,
Although the `Search All & Expand` is functional within RAW HTTP requests, the complementary `Replace` function is not working. Looks like a software bug that may be fixed. -- Sincerely, *Shay Ginsbourg* *Performance, Automation, and Load Testing Expert. * *Regulatory Affairs Consultant for Medical Software.* *(Since 2008)* *Ginsbourg.co.il* <http://Ginsbourg.co.il> Formerly QA Manager of LoadRunner at Mercury Interactive M.Sc. cum laude in Bio-Medical Engineering M.Sc. in Mechanical Engineering Mobile: +972(0)54-6690915 Email: [hidden email] Visit my personal page on LinkedIn at: http://www.linkedin.com/in/shayginsbourg |
Am 21.02.21 um 11:02 schrieb Shay Ginsbourg: > Hi, > > Although the `Search All & Expand` is functional within RAW HTTP requests, > the complementary `Replace` function is not working. Can you be more specific than "is not working"? I always like to have a description, of what you expect, what you did and what you saw. And try not to hijack email threads. That is, don't answer an old email and change the subject. Felix > > Looks like a software bug that may be fixed. > --------------------------------------------------------------------- To unsubscribe, e-mail: [hidden email] For additional commands, e-mail: [hidden email] |
Hi Felix,
Thank you for your swift response and attention. The details are as follows: Tested on Windows 10 host with java version "11.0.9" 2020-10-20 LTS 64-bits: Scenario: Add some text to RAW HTTP SAMPLER. Try from the Jmeter menu: `Search All & Expand` that text. Result: OK - The text is correctly found. Try from the Jmeter menu: `Replace` the same text with another text string. Result: That text is NOT replaced although it was correctly found. Hope this helps. Sincerely, Shay On Sun, Feb 21, 2021 at 12:21 PM Felix Schumacher < [hidden email]> wrote: > > Am 21.02.21 um 11:02 schrieb Shay Ginsbourg: > > Hi, > > > > Although the `Search All & Expand` is functional within RAW HTTP > requests, > > the complementary `Replace` function is not working. > > Can you be more specific than "is not working"? I always like to have a > description, of what you expect, what you did and what you saw. > > And try not to hijack email threads. That is, don't answer an old email > and change the subject. > > Felix > > > > > Looks like a software bug that may be fixed. > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [hidden email] > For additional commands, e-mail: [hidden email] > > -- Sincerely, *Shay Ginsbourg* *Performance, Automation, and Load Testing Expert. * *Regulatory Affairs Consultant for Medical Software.* *(Since 2008)* *Ginsbourg.co.il* <http://Ginsbourg.co.il> Formerly QA Manager of LoadRunner at Mercury Interactive M.Sc. cum laude in Bio-Medical Engineering M.Sc. in Mechanical Engineering Mobile: +972(0)54-6690915 Email: [hidden email] Visit my personal page on LinkedIn at: http://www.linkedin.com/in/shayginsbourg |
Hello Shay,
1/ Raw sampler is a 3rd party plugin that does not implement this feature. 2/ The replace feature is a « replace for correlation » , so it does not replace currently data in all éléments. Regards On Sunday, February 21, 2021, Shay Ginsbourg <[hidden email]> wrote: > Hi Felix, > > Thank you for your swift response and attention. > > The details are as follows: > > Tested on Windows 10 host with java version "11.0.9" 2020-10-20 LTS > 64-bits: > > Scenario: > > Add some text to RAW HTTP SAMPLER. > > Try from the Jmeter menu: `Search All & Expand` that text. > > Result: OK - The text is correctly found. > > Try from the Jmeter menu: `Replace` the same text with another text > string. > > Result: That text is NOT replaced although it was correctly found. > > > Hope this helps. > > Sincerely, > Shay > > > > > > > On Sun, Feb 21, 2021 at 12:21 PM Felix Schumacher < > [hidden email]> wrote: > > > > > Am 21.02.21 um 11:02 schrieb Shay Ginsbourg: > > > Hi, > > > > > > Although the `Search All & Expand` is functional within RAW HTTP > > requests, > > > the complementary `Replace` function is not working. > > > > Can you be more specific than "is not working"? I always like to have a > > description, of what you expect, what you did and what you saw. > > > > And try not to hijack email threads. That is, don't answer an old email > > and change the subject. > > > > Felix > > > > > > > > Looks like a software bug that may be fixed. > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [hidden email] > > For additional commands, e-mail: [hidden email] > > > > > > -- > > > Sincerely, > > > > *Shay Ginsbourg* > > *Performance, Automation, and Load Testing Expert. * > > *Regulatory Affairs Consultant for Medical Software.* > > *(Since 2008)* > > > > *Ginsbourg.co.il* > <http://Ginsbourg.co.il> > > > Formerly QA Manager of LoadRunner at Mercury Interactive > > > > M.Sc. cum laude in Bio-Medical Engineering > > M.Sc. in Mechanical Engineering > > > Mobile: +972(0)54-6690915 > Email: [hidden email] > > Visit my personal page on LinkedIn at: > http://www.linkedin.com/in/shayginsbourg > -- Cordialement Philippe M. Ubik-Ingenierie |
Free forum by Nabble | Edit this page |