Bad test name reported by samplers

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

Bad test name reported by samplers

piranha-2
Hello,

I regurarly have a problem with the names of tests that are reported by
listeners.
For the moment I didn't manage to clearly identify a scenario and a Test
Plan scheme for reproducing it systematically :(
However the behaviour I sometimes observe is the following one :

Consider the following test plan :
Test Plan
|----- Thread Group (looping infinitely)
          |----- Random or Interleave Controller
                    |----- SOAP XML/RPC Sampler 1
                    |----- SOAP XML/RPC Sampler 2
                    |----- SOAP XML/RPC Sampler 3
                    |----- SOAP XML/RPC Sampler 4
                    |----- HTTP Header Manager (Authorization header + empty
soapaction header)
                    |----- Agregate Report
                    |----- Results Table
                    |----- Results Tree
          |----- Java Sampler (sleep request)
          |----- User Defined Variables 1
          |----- User Defined Variables 2

The first time "SOAP XML/RPC Sampler 1" is launched I get its correct name
in the listeners reports.
Next times I get "User Defined Variables 1" as the name for "SOAP XML/RPC
Sampler 1".

Did someone experienced the same issue ?
Is it a known bug ?

Remark :
I checked that when the problem occurs the name is also wrong in the output
file optionnaly generated by the listeners.

Regards.




---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: Bad test name reported by listeners

piranha-2
As you may have guessed, the subject of my previous post was erroneous :
It should be "Bad test name reported by listeners" instead of "Bad test name
reported by samplers".

Regards
PiRanha

"PiRanha" wrote :

> Hello,
>
> I regurarly have a problem with the names of tests that are reported by
> listeners.
> For the moment I didn't manage to clearly identify a scenario and a Test
> Plan scheme for reproducing it systematically :(
> However the behaviour I sometimes observe is the following one :
>
> Consider the following test plan :
> Test Plan
> |----- Thread Group (looping infinitely)
>           |----- Random or Interleave Controller
>                     |----- SOAP XML/RPC Sampler 1
>                     |----- SOAP XML/RPC Sampler 2
>                     |----- SOAP XML/RPC Sampler 3
>                     |----- SOAP XML/RPC Sampler 4
>                     |----- HTTP Header Manager (Authorization header +
empty

> soapaction header)
>                     |----- Agregate Report
>                     |----- Results Table
>                     |----- Results Tree
>           |----- Java Sampler (sleep request)
>           |----- User Defined Variables 1
>           |----- User Defined Variables 2
>
> The first time "SOAP XML/RPC Sampler 1" is launched I get its correct name
> in the listeners reports.
> Next times I get "User Defined Variables 1" as the name for "SOAP XML/RPC
> Sampler 1".
>
> Did someone experienced the same issue ?
> Is it a known bug ?
>
> Remark :
> I checked that when the problem occurs the name is also wrong in the
output
> file optionnaly generated by the listeners.
>
> Regards.




---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: Bad test name reported by listeners

sebb-2-2
Sounds like a bug.

I suggest you create a Bugzilla issue for this, and attach a short
test plan that shows the problem, along with the full jmeter.log and
jtl output file.

S.
On 6/13/05, PiRanha <[hidden email]> wrote:

> As you may have guessed, the subject of my previous post was erroneous :
> It should be "Bad test name reported by listeners" instead of "Bad test name
> reported by samplers".
>
> Regards
> PiRanha
>
> "PiRanha" wrote :
> > Hello,
> >
> > I regurarly have a problem with the names of tests that are reported by
> > listeners.
> > For the moment I didn't manage to clearly identify a scenario and a Test
> > Plan scheme for reproducing it systematically :(
> > However the behaviour I sometimes observe is the following one :
> >
> > Consider the following test plan :
> > Test Plan
> > |----- Thread Group (looping infinitely)
> >           |----- Random or Interleave Controller
> >                     |----- SOAP XML/RPC Sampler 1
> >                     |----- SOAP XML/RPC Sampler 2
> >                     |----- SOAP XML/RPC Sampler 3
> >                     |----- SOAP XML/RPC Sampler 4
> >                     |----- HTTP Header Manager (Authorization header +
> empty
> > soapaction header)
> >                     |----- Agregate Report
> >                     |----- Results Table
> >                     |----- Results Tree
> >           |----- Java Sampler (sleep request)
> >           |----- User Defined Variables 1
> >           |----- User Defined Variables 2
> >
> > The first time "SOAP XML/RPC Sampler 1" is launched I get its correct name
> > in the listeners reports.
> > Next times I get "User Defined Variables 1" as the name for "SOAP XML/RPC
> > Sampler 1".
> >
> > Did someone experienced the same issue ?
> > Is it a known bug ?
> >
> > Remark :
> > I checked that when the problem occurs the name is also wrong in the
> output
> > file optionnaly generated by the listeners.
> >
> > Regards.
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>
>

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: Bad test name reported by listeners

piranha-2
Hello sebb,

I finally found the circumstances in which the bug occurs.
In fact it occurs when a sampler (tested with SOAP and HTTP samplers) has a
name that also corresponds to the name of a header declared in a HTTP Header
Manager.

So it can be reproduced with such a Test Plan :
Test Plan
 |----- Thread Group (looping infinitely)
           |----- Interleave Controller
                     |----- HTTP Sampler (named "Test 01")
                     |----- HTTP Sampler (named "Test 02")
                     |----- HTTP Sampler (named "Test 03")
                     |----- Results Table
           |----- Java Sampler (sleep request - optional)
           |----- HTTP Header Manager (with a header called "Test 02"
defined to a value of your choice)
           |----- User Defined Variables (named "My Var")

In the results table you should get something like this :
   - Test 01
   - Test 02 <==== first time it'OK
   - Test 03
   - Test 01
   - My Var <==== next times name is KO
   - Test 03
   - Test 01
   - My Var
   - Test 03
   ...

Remarks :
1. The bug is not linked to the Interleave controller. With a Random
controller the same behaviour is observed (the first time test #2 is
processed "Test 02" is displayed, next times the name is replaced by "My
Var").
2. I'm going to report the bug in Bugzilla

Regards.
PiRanha

> "sebb" wrote :
> Sounds like a bug.
> I suggest you create a Bugzilla issue for this, and attach a short
> test plan that shows the problem, along with the full jmeter.log and
> jtl output file.

> > "PiRanha" wrote :
> > Hello,
> >
> > I regurarly have a problem with the names of tests that are reported by
> > listeners.
> > For the moment I didn't manage to clearly identify a scenario and a Test
> > Plan scheme for reproducing it systematically :(
> > However the behaviour I sometimes observe is the following one :
> >
> > Consider the following test plan :
> > Test Plan
> > |----- Thread Group (looping infinitely)
> >           |----- Random or Interleave Controller
> >                     |----- SOAP XML/RPC Sampler 1
> >                     |----- SOAP XML/RPC Sampler 2
> >                     |----- SOAP XML/RPC Sampler 3
> >                     |----- SOAP XML/RPC Sampler 4
> >                     |----- HTTP Header Manager (Authorization header +
> > empty soapaction header)
> >                     |----- Agregate Report
> >                     |----- Results Table
> >                     |----- Results Tree
> >           |----- Java Sampler (sleep request)
> >           |----- User Defined Variables 1
> >           |----- User Defined Variables 2
> >
> > The first time "SOAP XML/RPC Sampler 1" is launched I get its correct
name
> > in the listeners reports.
> > Next times I get "User Defined Variables 1" as the name for "SOAP
XML/RPC

> > Sampler 1".
> >
> > Did someone experienced the same issue ?
> > Is it a known bug ?
> >
> > Remark :
> > I checked that when the problem occurs the name is also wrong in the
> > output file optionnaly generated by the listeners.
> >
> > Regards.




---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]